Introducción

How to replace the side buttons.

Partes

No se requieren partes.

  1. Depress the silver button. Pull from top of phone to lift the cover.
    • Depress the silver button.

    • Pull from top of phone to lift the cover.

  2. Hold battery from both sides at the bottom. Push upwards and gently lift to remove.
    • Hold battery from both sides at the bottom.

    • Push upwards and gently lift to remove.

  3. Remove 4 screws from corners using T-6 screwdriver.
    • Remove 4 screws from corners using T-6 screwdriver.

    • NOTE: Bottom two screws are gold.

    • NOTE: Make sure screws return to correct place when reassembling.

  4. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  5. Use a plastic opening tool to pry up back cover from two side clips. NOTE: sticker might be attached to rest of phone.
    • Use a plastic opening tool to pry up back cover from two side clips.

    • NOTE: sticker might be attached to rest of phone.

  6. Remove the back cover.
    • Remove the back cover.

  7. Use a plastic opening tool to gently remove the orange ribbon cable. Lift up the main logic board.
    • Use a plastic opening tool to gently remove the orange ribbon cable.

    • Lift up the main logic board.

    • NOTE: Rubber side buttons are not secure and might detach from the main logic board during removal.

  8. Carefully flip over main logic board. Remove rubber side buttons.
    • Carefully flip over main logic board.

    • Remove rubber side buttons.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ryan Kuroiwa

Miembro Desde 10/04/10

1 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 25-86, Amido Spring 2010 Miembro de Cal Poly, Team 25-86, Amido Spring 2010

CPSU-AMIDO-S10S25G86

5 Miembros

10 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 5,146