Saltar al contenido principal

Introducción

This guide is useful when encountering broken or stuck keys.

Partes

No se especificaron partes.

  1. Motorola V557 Keypad Replacement, Battery: paso 1, imagen 1 de 3 Motorola V557 Keypad Replacement, Battery: paso 1, imagen 2 de 3 Motorola V557 Keypad Replacement, Battery: paso 1, imagen 3 de 3
    • Push down on the silver button while sliding the back plate down to reveal the battery.

  2. Motorola V557 Keypad Replacement: paso 2, imagen 1 de 2 Motorola V557 Keypad Replacement: paso 2, imagen 2 de 2
    • Grab the lower edge of battery at the black areas and pull upward on the edges to remove it.

  3. Motorola V557 Keypad Replacement, SIM Card: paso 3, imagen 1 de 3 Motorola V557 Keypad Replacement, SIM Card: paso 3, imagen 2 de 3 Motorola V557 Keypad Replacement, SIM Card: paso 3, imagen 3 de 3
    • Move the the metal slider towards the top of the phone until it clicks out of its original position.

    • Slide out and remove the SIM card.

  4. Motorola V557 Keypad Replacement, Antenna: paso 4, imagen 1 de 2 Motorola V557 Keypad Replacement, Antenna: paso 4, imagen 2 de 2
    • Grip the antenna and twist it counterclockwise to loosen it.

    • When it has been loosened all the way, pull gently to remove the antenna piece.

  5. Motorola V557 Keypad Replacement, Rear Casing: paso 5, imagen 1 de 3 Motorola V557 Keypad Replacement, Rear Casing: paso 5, imagen 2 de 3 Motorola V557 Keypad Replacement, Rear Casing: paso 5, imagen 3 de 3
    • Remove the screw covers over the two top screws by prying gently with a pin.

    • The large cover in the upper left of the back plate has no screw behind it, so should not be removed.

  6. Motorola V557 Keypad Replacement: paso 6, imagen 1 de 3 Motorola V557 Keypad Replacement: paso 6, imagen 2 de 3 Motorola V557 Keypad Replacement: paso 6, imagen 3 de 3
    • Remove all four 6.0 mm Torx screws.

  7. Motorola V557 Keypad Replacement: paso 7, imagen 1 de 3 Motorola V557 Keypad Replacement: paso 7, imagen 2 de 3 Motorola V557 Keypad Replacement: paso 7, imagen 3 de 3
    • Insert a spudger into marked holes, one at a time, and pry away from the phone to release internal tabs.

    • Separate and detach the rear casing.

  8. Motorola V557 Keypad Replacement, Motherboard: paso 8, imagen 1 de 3 Motorola V557 Keypad Replacement, Motherboard: paso 8, imagen 2 de 3 Motorola V557 Keypad Replacement, Motherboard: paso 8, imagen 3 de 3
    • Separate the front ribbon cable from the board with a plastic opening tool.

  9. Motorola V557 Keypad Replacement: paso 9, imagen 1 de 3 Motorola V557 Keypad Replacement: paso 9, imagen 2 de 3 Motorola V557 Keypad Replacement: paso 9, imagen 3 de 3
    • Make sure you don’t break the ribbon cables that attach to the side buttons when removing the motherboard.

    • Lift out the motherboard only after all cables have been disconnected. Try to touch it only from the sides.

  10. Motorola V557 Keypad Replacement, Keypad: paso 10, imagen 1 de 3 Motorola V557 Keypad Replacement, Keypad: paso 10, imagen 2 de 3 Motorola V557 Keypad Replacement, Keypad: paso 10, imagen 3 de 3
    • With the phone flipped open, peel the keypad back to remove it from the casing, starting from the bottom.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Chad Brantley

Miembro Desde 06/10/10

32 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 7-50, Amido Fall 2010 Miembro de Cal Poly, Team 7-50, Amido Fall 2010

CPSU-AMIDO-F10S7G50

4 Miembros

24 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 983