Saltar al contenido principal

Introducción

Replacing a cracked or malfunctioning main LCD screen.

  1. Using the plastic opening tool, pry off the top faceplate.
    • Using the plastic opening tool, pry off the top faceplate.

    • Place the tool in the small crack that runs along the side of the phone and pry.

  2. Using the T6 Torx Screwdriver remove all 4 small screws.
    • Using the T6 Torx Screwdriver remove all 4 small screws.

  3. Remove silver plate from phone.
    • Remove silver plate from phone.

  4. Using the spudger remove the plastic camera casing
    • Using the spudger remove the plastic camera casing

  5. Using the iPod Opening Tool remove the yellow flex cable from the green logic board.
    • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

  6. Use Spudger or hands to detach flex cable from front screen logic board
    • Use Spudger or hands to detach flex cable from front screen logic board

  7. Using spudger remove the LCD screen from the green logic board. Using spudger remove the LCD screen from the green logic board.
    • Using spudger remove the LCD screen from the green logic board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Cecilia

Miembro Desde 11/04/10

1 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 27-96, Amido Spring 2010 Miembro de Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 Miembros

15 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,260