Saltar al contenido principal

Introducción

How to replace the keypad.

Partes

No se especificaron partes.

  1. Flip over the phone, press down the button and slide off the back cover. Remove the battery. Remove the battery.
    • Flip over the phone, press down the button and slide off the back cover.

    • Remove the battery.

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Locate the four screws on the back of the phone. Using your T6 Torx Screwdriver, unscrew these screws. Remove the SIM card located on the back of the phone.
    • Locate the four screws on the back of the phone.

    • Using your T6 Torx Screwdriver, unscrew these screws.

    • Remove the SIM card located on the back of the phone.

    • A ribbon near the antenna is still attached to the motherboard. Do not break this ribbon.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tyler Knisley

Miembro Desde 07/05/10

1 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 6-16, Maness Spring 2010 Miembro de Cal Poly, Team 6-16, Maness Spring 2010

CPSU-MANESS-S10S6G16

4 Miembros

14 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,457