Partes

No se requieren partes.

  1. Push down on the black tab located at the top center of the Motorola phone.
    • Push down on the black tab located at the top center of the Motorola phone.

  2. Remove the battery by pulling the battery from the top center.
    • Remove the battery by pulling the battery from the top center.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the four (4) T6 Torx screws from the back of the metal back plate.
    • Remove the four (4) T6 Torx screws from the back of the metal back plate.

  5. Insert the flat end of a spudger and pry the metal cover up off the phone. Insert the flat end of a spudger and pry the metal cover up off the phone.
    • Insert the flat end of a spudger and pry the metal cover up off the phone.

  6. Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger. Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.
    • Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.

  7. Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard. De-route the antenna cable by pulling it out.
    • Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard.

    • De-route the antenna cable by pulling it out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jorge Trujillo

Miembro Desde 19/05/11

499 Reputación

4 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 2,727