Motorola Razr V3c Face-Screen Replacement - Guía de reparación iFixit

Introducción

rough draft

Qué necesitas

Paso 1 Face-Screen

Motorola Razr V3c Face-Screen Replacement, Face-Screen: paso 1, imagen 1 de 1

Clear a table or desk to use as a workspace. You will need a container to place small screws as they will be used in reassembly.

Paso 2

Motorola Razr V3c Face-Screen Replacement: paso 2, imagen 1 de 1

Open the phone's face.

Paso 3

Motorola Razr V3c Face-Screen Replacement: paso 3, imagen 1 de 1

Unscrew the four screws located around the face plate using a 1.5mm Hex tool.

Paso 4

Motorola Razr V3c Face-Screen Replacement: paso 4, imagen 1 de 1

After removing the screws, use a flat surfaced tool to take the face-screen off.

Paso 5

Motorola Razr V3c Face-Screen Replacement: paso 5, imagen 1 de 1

Use this step as a checkpoint. Once the face-screen cover is off, the workspace should resemble this step’s picture.

Paso 6

Motorola Razr V3c Face-Screen Replacement: paso 6, imagen 1 de 1

Carefully remove the face-screen using your fingers.

Paso 7

Motorola Razr V3c Face-Screen Replacement: paso 7, imagen 1 de 1

You may now carefully install a functioning face-screen.

Paso 8

Motorola Razr V3c Face-Screen Replacement: paso 8, imagen 1 de 1

After securing the face-screen into the casing, place the face screen cover back on.

Paso 9

Motorola Razr V3c Face-Screen Replacement: paso 9, imagen 1 de 1

Screw in the four corner screws. After completion of this step, your phone should function properly. Enjoy!

Conclusión

Enjoy your newly inserted face-screen.

Autor

con 6 otros colaboradores

Nigel

Miembro Desde 09/06/11

133 Reputación

2 Guías creadas

+ 7 más insignias

Equipo

Cuesta, Team 1-5, Zipperian Fall 2011 Miembro de Cuesta, Team 1-5, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G5

1 Miembro

2 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 2,819