Introducción

This guide will show you how to remove and replace the camera for a Motorola V3c.

Partes

No se requieren partes.

  1. Remove the four rubber pieces from all corners of the area that borders the screen.
    • Remove the four rubber pieces from all corners of the area that borders the screen.

    Agregar Comentario

  2. Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.
    • Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

    • Be sure that you do not strip or damage the screws.

    Agregar Comentario

    • Carefully pry the screen away from the phone using a plastic spudger.

    • Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Take the screen housing off of the casing.

    • Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

    Agregar Comentario

    • Pry screen cover off with plastic spudger.

    • The screen cover has some adhesive holding it to the screen

    Agregar Comentario

    • Remove small black sticker covering the camera ribbon connector.

    Agregar Comentario

    • Flip over small hinge that covers the camera ribbon connection.

    Agregar Comentario

    • Pull off the rubber camera cover and camera.

    • The camera and camera cover may come off either separately or together.

    Agregar Comentario

Linea de Meta

Equipo

Cal Poly, Team 11-4, Forte Winter 2010 Miembro de Cal Poly, Team 11-4, Forte Winter 2010

CPSU-FORTE-W10S11G4

3 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 3

Todo El Tiempo: 4,372