Saltar al contenido principal

Motorola RIZR Z3 LCD Replacement

Qué necesitas

  1. Motorola RIZR Z3 LCD Replacement, Battery: paso 1, imagen 1 de 2 Motorola RIZR Z3 LCD Replacement, Battery: paso 1, imagen 2 de 2
    • Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.

  2. Motorola RIZR Z3 LCD Replacement: paso 2, imagen 1 de 2 Motorola RIZR Z3 LCD Replacement: paso 2, imagen 2 de 2
    • Tilt the battery by lifting at the exposed notch.

    • Slide the battery out of its casing.

  3. Motorola RIZR Z3 LCD Replacement, Motherboard: paso 3, imagen 1 de 1
    • Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.

  4. Motorola RIZR Z3 LCD Replacement: paso 4, imagen 1 de 2 Motorola RIZR Z3 LCD Replacement: paso 4, imagen 2 de 2
    • Use a plastic opening tool to lift the plastic casing.

    • Pull the plastic casing directly away from the phone.

  5. Motorola RIZR Z3 LCD Replacement: paso 5, imagen 1 de 1
    • Lift the black rubber loudspeaker housing up and out of the plastic casing.

  6. Motorola RIZR Z3 LCD Replacement: paso 6, imagen 1 de 2 Motorola RIZR Z3 LCD Replacement: paso 6, imagen 2 de 2
    • Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases.

    • Caution: Remove carefully, if broken, the phone will not be able to make calls.

  7. Motorola RIZR Z3 LCD Replacement: paso 7, imagen 1 de 2 Motorola RIZR Z3 LCD Replacement: paso 7, imagen 2 de 2
    • Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard.

    • Caution: Remove carefully, if broken, the phone will not function properly.

  8. Motorola RIZR Z3 LCD Replacement: paso 8, imagen 1 de 2 Motorola RIZR Z3 LCD Replacement: paso 8, imagen 2 de 2
    • Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out.

    • Caution: Do this gently Unclipping too fast may cause damage to your phone.

  9. Motorola RIZR Z3 LCD Replacement, LCD: paso 9, imagen 1 de 1
    • Turn the phone to the front.

    • Push the keypad out through the plastic casing.

  10. Motorola RIZR Z3 LCD Replacement: paso 10, imagen 1 de 1
    • Turn the phone to the side.

    • Thread the hinges of the slider through their holes in the casing and pull the slider down and away from the casing.

  11. Motorola RIZR Z3 LCD Replacement: paso 11, imagen 1 de 1
    • Use a T4 screwdriver to unscrew the two .15 inch screws holding the LCD to the faceplate.

  12. Motorola RIZR Z3 LCD Replacement: paso 12, imagen 1 de 3 Motorola RIZR Z3 LCD Replacement: paso 12, imagen 2 de 3 Motorola RIZR Z3 LCD Replacement: paso 12, imagen 3 de 3
    • Use a spudger to pry the plastic screen casing partially up from the LCD unit.

    • Use the spudger to pry the ribbon cable away from its clip on the LCD unit.

    • Caution: Do this carefully, damage to this ribbon cable will cause a blank screen.

    • Pull the plastic screen casing directly away from the LCD unit.

  13. Motorola RIZR Z3 LCD Replacement: paso 13, imagen 1 de 2 Motorola RIZR Z3 LCD Replacement: paso 13, imagen 2 de 2
    • Use a spudger to lift the LCD partially away from the metal casing.

    • Use the spudger to pry the ribbon cable directly up from its clip on the metal casing.

    • Caution: Damage to the ribbon cable here will cause screen damage.

    • Pull the LCD completely away from the metal casing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Brooke Shuford

Miembro Desde 10/10/11

65 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 5-34, Amido Fall 2011 Miembro de Cal Poly, Team 5-34, Amido Fall 2011

CPSU-AMIDO-F11S5G34

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 952