Introducción

This guide outlines the steps to take to remove or install the SIM card. The SIM card holds information that allows the service provider to locate and identify your phone. It is necessary for sending or receiving any calls or messages.

  1. Turn the phone over.
    • Turn the phone over.

    • Press and hold the release button in the middle of the back panel to release the back cover.

    • Slide the bottom panel down to open.

  2. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Remove the existing SIM card (if applicable) by applying little pressure with one finger and dragging it until the card is completely out. Remove the existing SIM card (if applicable) by applying little pressure with one finger and dragging it until the card is completely out.
    • Remove the existing SIM card (if applicable) by applying little pressure with one finger and dragging it until the card is completely out.

  4. Insert the new SIM card into the card reader with the chamfered edge in the upper left corner.
    • Insert the new SIM card into the card reader with the chamfered edge in the upper left corner.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Will Dickman

Miembro Desde 27/09/12

28 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 6-31, Regan Fall 2012 Miembro de Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,444