Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This guide will teach you how to replace a faulty fingerprint sensor on your Motorola Moto G5s Plus.
Qué necesitas
-
-
Bring the heat gun one to two inches from the edges of the display to melt the display adhesive.
-
Spend equal amounts of time applying heat around the entire edge of the phone.
-
-
-
-
Remove the nine black 5mm Torx-5 screws.
-
Remove the seven silver 5mm Torx-5 screws.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.