Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Starting at the USB port on the bottom, remove the rear cover by prying it off with your finger.
-
Work your way down the sides to avoid cracking the rear cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the eight 4.2 mm screws at the top and bottom of the phone using a T5 Torx screwdriver.
-
Using the same screwdriver, remove the six 3.2 mm screws on the sides.
-
Remove the next layer of the phone by prying it off with your fingers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
Using a plastic opening tool or tweezers, disconnect the SIM/SD card reader at the top of the phone.
-
Disconnect the battery connector by prying it off of the motherboard.
-
Disconnect the vibration motor by prying its connector off of the motherboard.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a plastic opening tool, carefully pry off the entire SIM/SD card reader component.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Peel off the two black stickers on the right side of the battery using your fingers.
-
Remove the battery by pulling the right side of it upwards.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove LCD connector by lifting the black plastic flap.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a T5 Torx screwdriver, unscrew the three 2.2 mm screws holding the motherboard in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
Use the prying tweezers to remove the front facing camera.
-
Cancelar: No complete esta guía.
9 personas más completaron esta guía.