Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Motorola Moto 360 Wrist Strap Replacement

Qué necesitas

  1. Motorola Moto 360 Wrist Strap Replacement, Wrist Strap: paso 1, imagen 1 de 1
    • Locate the spring-loaded pin that attaches the wrist strap to the watch.

    • There is a tiny groove on the end of the pin. This is where you will place the tweezers.

  2. Motorola Moto 360 Wrist Strap Replacement: paso 2, imagen 1 de 1
    • Take care not to lose the spring-loaded pin when removing the strap.

    • Use the tweezers to compress the spring-loaded pin so the strap can be removed.

  3. Motorola Moto 360 Wrist Strap Replacement: paso 3, imagen 1 de 2 Motorola Moto 360 Wrist Strap Replacement: paso 3, imagen 2 de 2
    • Pull the wristband away from the watch face.

Conclusión

To reassemble your device, follow these instructions in reverse order.

12 personas más completaron esta guía.

Steven Tan

Miembro Desde 01/30/15

311 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 17-32, Amido Winter 2015 Miembro de Cal Poly, Team 17-32, Amido Winter 2015

CPSU-AMIDO-W15S17G32

4 Miembros

18 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 11

Todo El Tiempo: 3,955