Motorola Edge (2021) Camera module Replacement

Introducción

Here is an easy to understand guide going over how to properly remove the camera module attached to the motherboard casing in the back of the phone. This module is responsible for protecting the camera like a case. This replacement may be needed if the phone falls and happens to crack the camera module.

Qué necesitas

Paso 1 Camera

Motorola Edge (2021) Camera module Replacement, Camera: paso 1, imagen 1 de 1

Use the iFixit iOpeners to heat the back of the phone by placing them vertically along the sides. This will weaken the glue so it opens easier.

Traducir

Paso 2

After the heating process, use the iFixit opening pick to slide in between the cracks, separating the glue.

Traducir

Paso 3

Gently remove the back panel of the smartphone.

Traducir

Paso 4

Now you need to uncrews the camera/motherboard casing.
Unscrew all the screws under the circles. Be careful not to miss a screw that might be hiding under the glue.

Traducir