Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
First begin by sliding down the battery door, and place that to the side.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the battery tab up, and remove the battery from the phone.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the phone over to the front, and slide an opening tool as shown between the metal housing & the plastic piece covering the lower portion of the phone by the microphone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now do the same to the top of the phone with your opening tool as shown to remove the other plastic piece covering the top of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now with both of the plastic covers removed, remove the 4 silver T5 screws on the top and bottom of the unit as shown.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Starting on the top right side of the phone, run your opening tool down the side and all the way around with slight force to begin to separate the back housing from the front assembly.
-
Look at the two pictures showing the clips to help you know where they are located.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Congratulations! You have now successfully removed your back housing from your Droid X!
-
Cancelar: No complete esta guía.
7 personas más completaron esta guía.
