Saltar al contenido principal

Motorola Droid Turbo Rear Case Replacement

Qué necesitas

  1. Motorola Droid Turbo Rear Case Replacement, Rear Case: paso 1, imagen 1 de 1
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

    This di not work; I had to use a blow dryer.

    Caroline Downie - Contestar

  2. Motorola Droid Turbo Rear Case Replacement: paso 2, imagen 1 de 2 Motorola Droid Turbo Rear Case Replacement: paso 2, imagen 2 de 2
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

    I had to go around the case, starting on the non-button side, around the top and then the other side. This, unfortunately, pulled on the rear case, pressed the power button and turned the device back on. I would suggest starting on the button side and going around.

    Ryan Helinski - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

Miembro Desde 09/30/13

89,849 Reputación

89 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 1,573