Introducción

Motherboard installation requires a teardown of the device.

Partes

No se requieren partes.

Remove the battery by sliding it down the rails to which it is connected.
  • Remove the battery by sliding it down the rails to which it is connected.

Agregar Comentario

Find a flat head or Phillips head screwdriver.
  • Find a flat head or Phillips head screwdriver.

  • Insert the screwdriver into the holes in the plastic rod connecting the key pad guard to the rear casing.

  • Use the screwdriver to push the rods towards each other until they click out of their locked position.

  • Note: This may require a large amount of force.

Agregar Comentario

  • Slide off the antenna guard and locate the four clips on the exterior of the rear casing.

  • Simultaneously push the clips outward while lifting the rear casing and keyguard away from the front casing.

  • Remove the key guard from the rear casing by taking it out of its position.

Agregar Comentario

  • Locate and unplug the black component of the antenna from the motherboard.

  • Under the black component should be a blue component. Unscrew this component in order to free the antenna.

Agregar Comentario

  • Slide the antenna out of the green tubing and slide the green tubing out of it's corresponding hole on the motherboard.

Agregar Comentario

  • Lift the motherboard out of its location in the front casing.

  • Do this slowly and gently so that none of the motherboard's components are damaged.

Agregar Comentario

  • With your new motherboard, hold the LCD side of the motherboard face down. Align the four clips on the front casing with the four notches on the motherboard.

  • While doing so, insert the LCD into the compartment in the front casing.

Agregar Comentario

  • Press firmly on the motherboard until it is snug inside the casing.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Andrew Lam

Miembro Desde 17/04/12

28 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 9-46, Regan Spring 2012 Miembro de Cal Poly, Team 9-46, Regan Spring 2012

CPSU-REGAN-S12S9G46

5 Miembros

8 Guías creadas

Nice, thanks.

Daniel - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 10

Todo El Tiempo: 2,365