Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use your finger to press the button and free the device rear case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
slide the black button to free the battery so you can grab it with your other hand.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
You will see one plastic clip on each side of the device. Use your thumbs to push them apart and being able to separate the front case from the device other components.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a metal spudger to pell off the four metal clips and separate the motherboard and keyboard from the main plastic part.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
The last thing you need to doto access the Logic Board is to separate the Keyboard/Screen block just taking apart with your fingers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two small metal clips keeping the cables safe.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic spudger to pell off the two cables on the back side of the screen.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic spudger to release the disconnected screen.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.