Introduction

The glass covering on mobile devices can be prone to damage and constant wear and tear. The Motorola Adventure V750 has a very moderate process in replacing the front protection screen.

Parts

No parts required.

    • Remove the back cover and battery of the Motorola Adventure V750.

    Add Comment

    • Remove four screws that are visible using a screwdriver.

    Add Comment

    • After removing the battery chamber, you can unclip one of the ribbons that connect the screen to the main body of the phone. This divides the phone into two halves.

    Add Comment

  1. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove two screws located at the bottom of the main display.

    Add Comment

    • Now the display(screen) can be removed by sliding a sharp object or fingernail along the edge of the housing. This releases the clip attached to the screen.

    Add Comment

    • Release the display up to the point where you see two metal parts (left and right of the Motorola text). The top part of the display is held on with double sided tape.

    Add Comment

    • Gently unstick the tape and remove the display. Be careful not to bend this part.

    Add Comment

    • Carefully install the new glass.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Kyle

Member since: 10/01/2012

572 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 557