Saltar al contenido principal

Introducción

The glass covering on mobile devices can be prone to damage and constant wear and tear. The Motorola Adventure V750 has a very moderate process in replacing the front protection screen.

Herramientas

Partes

No se especificaron partes.

    • Remove the back cover and battery of the Motorola Adventure V750.

    • Using a screwdriver, remove the four screws that are visible.

    • After removing the battery chamber, unclip one of the ribbons that connect the screen to the main body of the phone. This divides the phone in half.

    • Remove the two screws located at the bottom of the main display.

    • Remove the display screen by sliding a sharp object or fingernail along the edge of the housing.

    • Release the display up to the point where you see two metal parts (left and right of the Motorola text). The top part of the display is held on with double-sided tape.

    • Gently unstick the tape and remove the display. Be careful not to bend this part.

    • Carefully install the new glass.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Kyle

Miembro Desde 01/10/12

590 Reputación

4 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 636