Repara tus cosas Comunidad Tienda

Moto C Motherboard Assembly Replacement

Introducción

Use this guide to remove the motherboard assembly of the Motorola Moto C.

Qué necesitas

  1. Moto C Motherboard Assembly Replacement, Back Cover: paso 1, imagen 1 de 3 Moto C Motherboard Assembly Replacement, Back Cover: paso 1, imagen 2 de 3 Moto C Motherboard Assembly Replacement, Back Cover: paso 1, imagen 3 de 3

    • Power off your phone before beginning disassembly.

    • Insert a thumbnail, or spudger, into the notch on the bottom right corner to start separating the phone unit from the back cover.

    • Move it to the bottom left corner and pry the phone unit out of the back cover until you can get a good grip.

    Traducir

  2. Moto C Motherboard Assembly Replacement: paso 2, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 2, imagen 2 de 2

    • Lift the phone out of the back cover.

    Traducir

  3. Moto C Motherboard Assembly Replacement, Battery: paso 3, imagen 1 de 3 Moto C Motherboard Assembly Replacement, Battery: paso 3, imagen 2 de 3 Moto C Motherboard Assembly Replacement, Battery: paso 3, imagen 3 de 3

    • Use a finger or spudger to lever the battery out of its recess and remove it.

    Traducir

  4. Moto C Motherboard Assembly Replacement, Motherboard Cover: paso 4, imagen 1 de 1

    • Remove the six 3.5 mm long Torx T5 screws.

    Traducir

  5. Moto C Motherboard Assembly Replacement: paso 5, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 5, imagen 2 de 2

    • Insert an opening pick between the cover and the motherboard near the SIM 2 slot where the power buttons are located.

    • Slide and twist the opening pick to pry open the plastic clips securing the cover.

    Traducir

  6. Moto C Motherboard Assembly Replacement: paso 6, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 6, imagen 2 de 2

    • Slide an opening pick between the cover and the motherboard on the opposite side next to the SD card slot.

    • Twist the opening pick to pry open the plastic clips securing the cover.

    Traducir

  8. Moto C Motherboard Assembly Replacement: paso 7, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 7, imagen 2 de 2

    • Remove the motherboard cover.

    Traducir

  9. Moto C Motherboard Assembly Replacement, Motherboard Assembly: paso 8, imagen 1 de 1

    • Remove the three 2.5 mm long T5 Torx screws.

    Traducir

  10. Moto C Motherboard Assembly Replacement: paso 9, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 9, imagen 2 de 2

    • Use the tip of an opening pick to pry up and open the black lever of the ZIF connector located on the bottom left of the motherboard.

    Traducir

  11. Moto C Motherboard Assembly Replacement: paso 10, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 10, imagen 2 de 2

    • Use a pair of tweezers to pull the power and volume button flex cable out of the ZIF connector.

    • Fold the power and volume button flex cable out of the way.

    Traducir

  12. Moto C Motherboard Assembly Replacement: paso 11, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 11, imagen 2 de 2

    • Use the flat end of a spudger to pry up and disconnect the display flex cable located at the bottom of the motherboard.

    Traducir

  13. Moto C Motherboard Assembly Replacement: paso 12, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 12, imagen 2 de 2

    • Use the tip of an opening pick to pry up and open the black lever of the ZIF connector located at the top of the motherboard next to the rear camera.

    Traducir

  14. Moto C Motherboard Assembly Replacement: paso 13, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 13, imagen 2 de 2

    • Use a pair of tweezers to pull the digitizer flex cable out of the ZIF connector.

    Traducir

  15. Moto C Motherboard Assembly Replacement: paso 14, imagen 1 de 1

    • Prepare an iOpener and apply it to the upper half of the display for at least two minutes to loosen the adhesive beneath the vibration motor and the rear facing camera.

    Traducir

  16. Moto C Motherboard Assembly Replacement: paso 15, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 15, imagen 2 de 2

    • Don't try to remove the motherboard all the way yet. The antenna cable is still connected to its rear side.

    • Use a spudger to carefully lift the motherboard until you can get a good grip. Avoid to damage the cables next to the motherboard.

    Traducir

  17. Moto C Motherboard Assembly Replacement: paso 16, imagen 1 de 3 Moto C Motherboard Assembly Replacement: paso 16, imagen 2 de 3 Moto C Motherboard Assembly Replacement: paso 16, imagen 3 de 3

    • Fold the motherboard over the battery cavity to access the coaxial cable connectors.

    Traducir

  18. Moto C Motherboard Assembly Replacement: paso 17, imagen 1 de 2 Moto C Motherboard Assembly Replacement: paso 17, imagen 2 de 2

    • Use a pair of tweezers to pry up and disconnect the antenna cable from the back of the motherboard.

    Traducir

  19. Moto C Motherboard Assembly Replacement: paso 18, imagen 1 de 1

    • Remove the motherboard.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Dominik Schnabelrauch

Miembro Desde 11/23/16

202,546 Reputación

682 Guías creadas

Insignias: 40

+ 37 más insignias

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,718 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 12

Todo El Tiempo: 1,740