Montgomery Ward GEN-39500 Antenna Replacement - Guía de reparación iFixit

Introducción

The antenna receive an AM/FM radio signal. This guide will help you replace your antenna in case it is damaged.

Qué necesitas

Paso 1 Back Cover

Montgomery Ward GEN-39500 Antenna Replacement, Back Cover: paso 1, imagen 1 de 1

Remove the nine 35 mm Phillips screws securing the back cover of the case.

Paso 2

Montgomery Ward GEN-39500 Antenna Replacement: paso 2, imagen 1 de 1

Carefully remove the back cover.
Soldered wires connect electronics on the back cover to the internal electronics. Be careful not to break any connections.

Paso 3

Montgomery Ward GEN-39500 Antenna Replacement: paso 3, imagen 1 de 2

Montgomery Ward GEN-39500 Antenna Replacement: paso 3, imagen 2 de 2

Unplug the black and yellow wires connecting the power supply unit to the rest of the electronics:
This is not necessarily required. This step is to allow the back cover more movement as you work on the inside of the unit.

Paso 4 Antenna

Montgomery Ward GEN-39500 Antenna Replacement, Antenna: paso 4, imagen 1 de 2

Montgomery Ward GEN-39500 Antenna Replacement, Antenna: paso 4, imagen 2 de 2

Unsolder the wire connecting the antenna to the radio.

Paso 5

Montgomery Ward GEN-39500 Antenna Replacement: paso 5, imagen 1 de 1

Tilt the back cover up and remove the two 7.5 mm Phillips screws holding the antenna in place.

Paso 6

Montgomery Ward GEN-39500 Antenna Replacement: paso 6, imagen 1 de 1

Remove the antenna.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Dustin Platt

Miembro Desde 04/01/15

931 Reputación

6 Guías creadas

+ 10 más insignias

Equipo

Cal Poly, Team 12-5, Lancaster Spring 2015 Miembro de Cal Poly, Team 12-5, Lancaster Spring 2015

CPSU-LANCASTER-S15S12G5

4 Miembros

13 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 122