Monster DNA Speaker Replacement

Introducción

The sound can sometimes get muffled through both earpieces which probably means there is an issue in the speakers. If the speakers themselves are the problem, then there may not be much of a chance of repairing the existing pair. If the speaker is not functioning properly it may need to be replaced altogether.

Qué necesitas

Paso 1 Speaker

Monster DNA Speaker Replacement, Speaker: paso 1, imagen 1 de 2

Monster DNA Speaker Replacement, Speaker: paso 1, imagen 2 de 2

Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws.

Editar

Paso 2

Desolder the wires to completely remove the speaker.
Take note of the proper location of the wires reassembly.

Editar

Paso 3

Use a heatgun to loosen the glue holding down the speaker.
Be careful to take safety precautions such as gloves as not to cause injury.

Editar

Paso 4

Pry the speaker out using a plastic opening tool or metal spudger.
Using too much force will damage the headphones and the new speaker may not go back into place properly.

Editar