Saltar al contenido principal

Modem & WIFI Card Prerequisite

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. Modem & WIFI Card Prerequisite, Modem & WIFI Card Prerequisite: paso 1, imagen 1 de 3 Modem & WIFI Card Prerequisite, Modem & WIFI Card Prerequisite: paso 1, imagen 2 de 3 Modem & WIFI Card Prerequisite, Modem & WIFI Card Prerequisite: paso 1, imagen 3 de 3
    Herramienta utilizada en este paso:
    Anti-Static Wrist Strap
    $7.95
    Comprar
    • Flip the computer over and place it on a clean level surface.

    • Loosen the screws using a size #0 Phillips screwdriver.

    • The screws do not come completely out.

    • It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.

  2. Modem & WIFI Card Prerequisite: paso 2, imagen 1 de 2 Modem & WIFI Card Prerequisite: paso 2, imagen 2 de 2
    • Once the screws are loose, open the panel using a plastic opening tool to access the components below.

    • The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Master Techs Miembro de Master Techs

Community

322 Miembros

2,535 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 84