Modal MD-SPBT01 LED Light Wiring Replacement - Guía de reparación iFixit

Introducción

For this guide, we will be opening up the speaker and taking the defective LED wiring out so the light works again.

Qué necesitas

Paso 1 LED Light Wiring

Modal MD-SPBT01 LED Light Wiring Replacement, LED Light Wiring: paso 1, imagen 1 de 2

Modal MD-SPBT01 LED Light Wiring Replacement, LED Light Wiring: paso 1, imagen 2 de 2

Use your plastic opening tool to pry the metal speaker cover off.

Paso 2

Modal MD-SPBT01 LED Light Wiring Replacement: paso 2, imagen 1 de 1

You can now use the Phillips #00 screwdriver to remove the four screws.

Paso 3

Modal MD-SPBT01 LED Light Wiring Replacement: paso 3, imagen 1 de 1

With the screws removed, you can now remove the top piece of the speaker to gain access to the interior.

Paso 4

Modal MD-SPBT01 LED Light Wiring Replacement: paso 4, imagen 1 de 1

Locate the LED wire connection and remove it from the mother board.
To make replacing the LED wiring easier, remove the speaker wire to fully disconnect the speaker from the mother board.

Paso 5

Modal MD-SPBT01 LED Light Wiring Replacement: paso 5, imagen 1 de 1

Now you can remove the wiring from the speaker side of the device.
It might take a bit of work to remove the wires because they are glued down on this side.

Paso 6

Modal MD-SPBT01 LED Light Wiring Replacement: paso 6, imagen 1 de 1

Now with the LED wiring removed, a new wire can be installed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 1 otro colaborador

Nathan Hall

Miembro Desde 10/13/15

258 Reputación

2 Guías creadas

+ 9 más insignias

Equipo

Sam Houston State, Team 2-4, Blackburne Fall 2015 Miembro de Sam Houston State, Team 2-4, Blackburne Fall 2015

SHSU-BLACKBURNE-F15S2G4

3 Miembros

4 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 622