Saltar al contenido principal
  1. Lift the black cover off. Remove all 4 Phillips #2 screws. Remove all 4 Phillips #2 screws.
    • Lift the black cover off.

    • Remove all 4 Phillips #2 screws.

  2. Remove the two 24mm Phillips #2 screws.
    • Remove the two 24mm Phillips #2 screws.

    • Remove the three 8mm Phillips #2 screws.

  3. Lift the back and pry the back off. The panel is held in with clips on the side. It needs a lot of force the take it off. The panel is held in with clips on the side. It needs a lot of force the take it off.
    • Lift the back and pry the back off.

    • The panel is held in with clips on the side. It needs a lot of force the take it off.

  4. Remove the four 5mm nut screws. Remove the four 5mm nut screws.
    • Remove the four 5mm nut screws.

  5. Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora

    Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora
  6. Remove the seven Phillips #1 screws. Remove the seven Phillips #1 screws.
    • Remove the seven Phillips #1 screws.

  7. Remove the three Phillips #2 screws. Remove the two data/power cables.
    • Remove the three Phillips #2 screws.

    • Remove the two data/power cables.

    • Remove the two speaker cables.

  8. Pull the two tabs. Pull the connector off. Pull the connector off.
    • Pull the two tabs.

    • Pull the connector off.

  9. Remove the switch cable off. Remove the two Phillips #2 screws.
    • Remove the switch cable off.

    • Remove the two Phillips #2 screws.

  10. Remove the four display power cables. These cables are interchangeable.
    • Remove the four display power cables.

    • These cables are interchangeable.

  11. Lift the display out. Lift the display out. Lift the display out.
    • Lift the display out.

  12. Remove the four Phillips #2 screws. These screws release the display from its enclosure. Hold the screen when removing these screws.
    • Remove the four Phillips #2 screws.

    • These screws release the display from its enclosure. Hold the screen when removing these screws.

  13. Remember to plug in all the cables on the display. Remember to plug in all the cables on the display.
    • Remember to plug in all the cables on the display.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Padraic Hoselton

Miembro Desde 22/08/17

3,017 Reputación

13 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

287 Miembros

811 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 47