Saltar al contenido principal

Introducción

To replace the screen of the Mio ALPHA 2, firstly you would need a proper repair toolkit. This is a relatively easy replacement as you would only need a Philip screwdriver with a PH0 head and tweezers. Be careful not to apply too much force or tug the cords inside.

This guide would be helpful if you're trying to replace the screen of your Mio ALPHA 2.

  1. Remove the four 6.7mm JIS #00 screws from the back cover. Remove the four 6.7mm JIS #00 screws from the back cover.
    • Remove the four 6.7mm JIS #00 screws from the back cover.

  2. Pull off the back cover of the watch Use a pair of tweezers to flip up the retaining flap on the  ribbon cable ZIF socket. Remove the ribbon cable from its socket.
    • Pull off the back cover of the watch

    • Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.

    • Remove the ribbon cable from its socket.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Remove the four 3.8mm JIS #00 screws from the motherboard. Remove the motherboard with tweezers Remove the motherboard with tweezers
    • Remove the four 3.8mm JIS #00 screws from the motherboard.

    • Remove the motherboard with tweezers

  5. Remove the screen using tweezers.
    • Remove the screen using tweezers.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Wong Jun Hua

Miembro Desde 21/05/18

169 Reputación

2 Guías creadas

Equipo

IUPUI, Team S1-G3, Harley Spring 2018 Miembro de IUPUI, Team S1-G3, Harley Spring 2018

IUPUI-HARLEY-S18S1G3

6 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 9

Todo El Tiempo: 106