Saltar al contenido principal

Introducción

Before you start the replacement process, make sure that you have the proper repair tools, a Philips PH0 head and tweezers. You should be careful not to exert too much pressure/force on the components.

This guide will be able to walk you through the steps to replace your Mio ALPHA 2's motherboard.

  1. Remove the four 6.7mm JIS #00 screws from the back cover. Remove the four 6.7mm JIS #00 screws from the back cover.
    • Remove the four 6.7mm JIS #00 screws from the back cover.

  2. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  3. Pull off the back cover of the watch Use a pair of tweezers to flip up the retaining flap on the  ribbon cable ZIF socket. Remove the ribbon cable from its socket.
    • Pull off the back cover of the watch

    • Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.

    • Remove the ribbon cable from its socket.

  4. Remove the four 3.8mm JIS #00 screws from the motherboard. Remove the motherboard with tweezers Remove the motherboard with tweezers
    • Remove the four 3.8mm JIS #00 screws from the motherboard.

    • Remove the motherboard with tweezers

Conclusión

To reassemble your device, follow these instructions in reverse order.

Wong Jun Hua

Miembro Desde 21/05/18

169 Reputación

2 Guías creadas

Equipo

IUPUI, Team S1-G3, Harley Spring 2018 Miembro de IUPUI, Team S1-G3, Harley Spring 2018

IUPUI-HARLEY-S18S1G3

6 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 4

Todo El Tiempo: 116