Saltar al contenido principal

Minolta Maxxum STsi Back Clock Button Replacement

Qué necesitas

  1. Minolta Maxxum STsi Back Clock Button Replacement, Back Clock Button: paso 1, imagen 1 de 1
    • Open the back panel by firmly pressing up on the back-cover release on the lower right side of the camera.

  2. Minolta Maxxum STsi Back Clock Button Replacement: paso 2, imagen 1 de 3 Minolta Maxxum STsi Back Clock Button Replacement: paso 2, imagen 2 de 3 Minolta Maxxum STsi Back Clock Button Replacement: paso 2, imagen 3 de 3
    • Remove the black case by gently lifting it with your fingers and rotating counterclockwise.

  3. Minolta Maxxum STsi Back Clock Button Replacement: paso 3, imagen 1 de 2 Minolta Maxxum STsi Back Clock Button Replacement: paso 3, imagen 2 de 2
    • Remove the five black Phillips #00 2.5 mm screws from the back panel.

    • Also remove the two black Phillips #00 5.0 mm screws from the back panel.

  4. Minolta Maxxum STsi Back Clock Button Replacement: paso 4, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar
    • Use the tweezers to carefully peel back the adhesive foam connecting the back panel to the case and remove the panel.

  5. Minolta Maxxum STsi Back Clock Button Replacement: paso 5, imagen 1 de 2 Minolta Maxxum STsi Back Clock Button Replacement: paso 5, imagen 2 de 2
    • Use the tweezers to carefully peel off the rubber clock button.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jacobe Labog

Miembro Desde 05/02/15

301 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 14-12, Amido Spring 2015 Miembro de Cal Poly, Team 14-12, Amido Spring 2015

CPSU-AMIDO-S15S14G12

3 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 13

Todo El Tiempo: 460