Mini Fridge Hinges Replacement

Introducción

Is your mini fridge door not working properly? Are you having trouble keeping the door closed and the contents cold? You may want to inspect the quality of the hinges connecting your door to the fridge.

This guide is designed to assist you in replacing your mini fridge hinges. Before replacing your hinges verify that there are not any underlying problems with your door seal and mechanical components. Should these remain functional but the hinges are not you can proceed to follow this guide.

These hinges can become damaged, rusted, or worn over time resulting in poor functionality of the fridge door. This repair can be completed by one person but an assistant is helpful.

Qué necesitas

Paso 1 Hinges

Mini Fridge Hinges Replacement, Hinges: paso 1, imagen 1 de 1

Remove the plug from the outlet. Be sure to grab from the head of the cord.

Editar

Paso 2

Remove all food items and shelves from the fridge.
Place removed contents to the side and if needed place food items in another fridge temporarily.

Editar

Paso 3

Remove the cover to the top hinge to access the hinge and screws. If you are unable to remove the cover with your hands, use a flathead screwdriver to pry it off.
Remove the three 20 mm Phillips #1 screws from beneath the cover.

Editar

Paso 4

Mini Fridge Hinges Replacement: paso 4, imagen 3 de 3

After removing the top hinge, lift the door off of the bottom hinge.
Place the door and removed top hinge securely to the side.

Editar

Paso 5

Rotate the fridge onto its side.
Do not turn the fridge upside down to protect the internal components of the fridge.
Remove the two 19 mm Phillips #1 screws and the bottom hinge.

Editar

After laying it on it’s side does the mini-fridge need to stand upright for a certain period of time before plugging it into power. If so, that would be really good info to add here.

sbacklun - 29 de dic. de 2022 Contestar

Paso 6

Install the bottom replacement hinge and the two 19 mm Phillips #1 screws.
Turn the fridge right side up after the bottom hinge is replaced.

Editar

Paso 7

Place the door on the bottom hinge, aligning the hole with the hinge.
Install the new top hinge and the three 20 mm Philips #1 screws. Ensure the orientation of the hinge lines up with the door.
Tighten as needed until the fridge door opens and closes normally and is not uneven.
Replace the top cover and the shelving inside the fridge.

Editar

Conclusión

This is a relatively easy fix and is easily repeatable. The replacement parts are inexpensive. We hope this guide extends the life of a mini fridge and expands your understanding of the topic.

Una persona más ha completado esta guía.