Milwaukee M12 2457-20 Disassembly - Guía de reparación iFixit

Introducción

This guide will show you how to disassemble the Milwaukee M12 Cordless 3/8" Ratchet to access various parts for replacement or repairs.

Qué necesitas

Paso 1 Housing

Milwaukee M12 2457-20 Disassembly, Housing: paso 1, imagen 1 de 2

Milwaukee M12 2457-20 Disassembly, Housing: paso 1, imagen 2 de 2

Unscrew the four M3 x 10 T-10 screws located on the neck.

Paso 2

Milwaukee M12 2457-20 Disassembly: paso 2, imagen 1 de 2

Milwaukee M12 2457-20 Disassembly: paso 2, imagen 2 de 2

Remove the spring pin from the switch paddle and take off the switch paddle.

Paso 3

Milwaukee M12 2457-20 Disassembly: paso 3, imagen 1 de 1

Unscrew the four M2.6 x 14 ST T-8 screws located on the body.
Unscrew the M2.6 x 10 ST T-8 screw located underneath the switch paddle.

Paso 4

Milwaukee M12 2457-20 Disassembly: paso 4, imagen 1 de 2

Milwaukee M12 2457-20 Disassembly: paso 4, imagen 2 de 2

Separate the two housing parts of the tool.
Remove the 3/8" yoke assembly and the motor assembly from the tool housing.

Paso 5

Milwaukee M12 2457-20 Disassembly: paso 5, imagen 1 de 2

Milwaukee M12 2457-20 Disassembly: paso 5, imagen 2 de 2

Remove the drive pin connecting the 3/8" yoke assembly and the motor assembly.
Remove the crankshaft, planet gears, carrier assembly, and ring gear from the motor assembly.
Be aware that these parts are lubricated with grease.

Paso 6

Milwaukee M12 2457-20 Disassembly: paso 6, imagen 1 de 1

You have now successfully dismantled the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Peter Lizotte

Miembro Desde 10/25/19

183 Reputación

1 Guía escrita

Equipo

UMass Dartmouth, Team S1-G6, O'Connell Fall 2019 Miembro de UMass Dartmouth, Team S1-G6, O'Connell Fall 2019

UMASSD-O'CONNELL-F19S1G6

3 Miembros

1 Guía escrita

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 19

Ultimos 30 días: 19

Todo El Tiempo: 76