Introducción
For this guide, you will be replacing the device's camera. You will need to be mindful and careful of the device's other exposed components when following this guide.
Qué necesitas
-
-
Using a J00 Phillips-head screwdriver, remove the two screws located at the bottom of the device.
-
-
-
-
Near the top left of the device, gently unclip the gold ribbon cable by pulling up the black clip holding it in place and removing the ribbon.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Equipo
USF Tampa, Team 6-6, Remmell Fall 2016 Miembro de USF Tampa, Team 6-6, Remmell Fall 2016
USFT-REMMELL-F16S6G6
3 Miembros
10 Guías creadas
