Saltar al contenido principal
  1. Este paso está sin traducir. Ayuda a traducirlo

    Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.
    • Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.

  2. Este paso está sin traducir. Ayuda a traducirlo

    There are two T4 screws under the cap. Remove both with a T4 screwdriver.
    • There are two T4 screws under the cap. Remove both with a T4 screwdriver.

    • Be careful removing the screws; the screw heads can break very easily.

  3. Este paso está sin traducir. Ayuda a traducirlo

    Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom. Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device. Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.
    • Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom.

    • Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.

Linea de Meta

turey

Miembro Desde 11/11/09

297 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 6-5, Maness Fall 2009 Miembro de Cal Poly, Team 6-5, Maness Fall 2009

CPSU-MANESS-F09S6G5

5 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 9

Todo El Tiempo: 3,900