Menú

Tus configuraciones

Microsoft Zune 80 Case Replacement

Escrito Por: turey (y 8 de otros participantes)
  • Comentarios: 0
  • Favoritos: 2

Dificultad

Moderar

Pasos

3

Tiempo Requerido

10 minutos

Secciones

1

Banderas

0

Introducción

Removal of case backing, allowing for access to internal components.

  1. Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.

    • Use a metal spudger or Zune opening tool to remove the small silver plastic cap on top of the device.

    Editar

  3. There are two T4 screws under the cap. Remove both with a T4 screwdriver.

    • There are two T4 screws under the cap. Remove both with a T4 screwdriver.

    • Be careful removing the screws; the screw heads can break very easily.

    Editar

  4. Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom. Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device. Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.

    • Using a metal spudger or Zune opening tool, remove the aluminum backing starting from the top. There are 5 clips on each side and two on the bottom.

    • Be careful not to press the tools in too far; there are exposed cables right inside the edge of the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 8 otros colaboradores

turey

Miembro Desde 11/11/09

297 Reputación

2 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Cal Poly, Team 6-5, Maness Fall 2009 Miembro de Cal Poly, Team 6-5, Maness Fall 2009

CPSU-MANESS-F09S6G5

5 Miembros

5 Guías creadas

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 3,905