Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Usa un iOpener calentado o una pistola de calor para calentar los bordes de la pantalla y ablandar su adhesivo.
-
-
-
Aplica una ventosa lo más cerca posible del borde de la pantalla.
-
Usa la ventosa para levantar el borde de la pantalla lo suficiente como para insertar una púa de apertura debajo del borde.
-
Desliza la púa de apertura alrededor de los bordes de la pantalla para cortar el adhesivo del bisel.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a T5 Torx screwdriver, unscrew a total number of 23 screws located on the outside panel of the Surface Pro.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool or fingers to pry out the front camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the T5 torx screw driver to unscrew the 6 T5 screws in the left and right outside metal panels
-
Use the T2 torx screw driver to unscrew the 23 T2 screws on the left and right outside metal panels
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull out the orange charging port strip using tweezers
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the two T5 torx screws located on each side of the charging port.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once you have unscrewed the charging port, you can gently pull it out with your hands.
-
Cancelar: No complete esta guía.
5 personas más completaron esta guía.
4 comentarios
Where do you get a replacement charging port at?