Saltar al contenido principal

Microsoft Lumia 435 LCD Display Replacement

Qué necesitas

Resumen del Video

  1. Microsoft Lumia 435 LCD Display Replacement, Back Cover: paso 1, imagen 1 de 3 Microsoft Lumia 435 LCD Display Replacement, Back Cover: paso 1, imagen 2 de 3 Microsoft Lumia 435 LCD Display Replacement, Back Cover: paso 1, imagen 3 de 3
    • Switch off the phone.

    • Remove the battery and any inserted SIM and memory cards.

    • Use a screwdriver Torx T6 and remove the 4x black screws.

  2. Microsoft Lumia 435 LCD Display Replacement: paso 2, imagen 1 de 3 Microsoft Lumia 435 LCD Display Replacement: paso 2, imagen 2 de 3 Microsoft Lumia 435 LCD Display Replacement: paso 2, imagen 3 de 3
    • There are several plastic locking clips hold the back cover to the frame.

    • Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

  3. Microsoft Lumia 435 LCD Display Replacement, Logic board: paso 3, imagen 1 de 3 Microsoft Lumia 435 LCD Display Replacement, Logic board: paso 3, imagen 2 de 3 Microsoft Lumia 435 LCD Display Replacement, Logic board: paso 3, imagen 3 de 3
    • Unhook:

    • the touch screen flex cable

    • the LCD Display flex cable

    • Use a plastic tool lift up and remove the Logic board.

  4. Microsoft Lumia 435 LCD Display Replacement: paso 4, imagen 1 de 2 Microsoft Lumia 435 LCD Display Replacement: paso 4, imagen 2 de 2
    • This is the logic board / main board - a front and rear view.

  5. Microsoft Lumia 435 LCD Display Replacement, LCD Display: paso 5, imagen 1 de 3 Microsoft Lumia 435 LCD Display Replacement, LCD Display: paso 5, imagen 2 de 3 Microsoft Lumia 435 LCD Display Replacement, LCD Display: paso 5, imagen 3 de 3
    • The Display metal shield is locked to the frame by 4x locking clips.

    • Use a tool with a sharp tip and careful unlock them and remove the shield.

  6. Microsoft Lumia 435 LCD Display Replacement: paso 6, imagen 1 de 3 Microsoft Lumia 435 LCD Display Replacement: paso 6, imagen 2 de 3 Microsoft Lumia 435 LCD Display Replacement: paso 6, imagen 3 de 3
    • The display is stuck tovthe touch screen glass with a double-sided adhesive tape.

    • Use a hair dryer or hot air gun and worm the glass to make adhesive soften.

    • Distort the frame a little and use a thin plastic tool to separate the display from the frame.

  7. Microsoft Lumia 435 LCD Display Replacement: paso 7, imagen 1 de 1
    • The display is very fragile, do the separation very carefully.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

ZFix

Miembro Desde 12/09/13

191,079 Reputación

330 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

322 Miembros

2,507 Guías creadas

2 comentarios

كيف اقوم بفك الهاتف وفحص الخلل الذي يوجد فيه .اعني ان هاتفي لا يقبل العمل اظن انه محروق كيف افحصه ؟

How do I remove the phone and to inspect the defect in which the .ani there is a telephone that does not accept the work I think it's seared how it checked ?

mohammad7salaheddin - Contestar

I am pretty sure he didn’t use ifixit stuff to fix the screen, lmao

mario rados - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 9

Todo El Tiempo: 3,212