Saltar al contenido principal

Introducción

How to disassemble Microsoft Lumia 435 and change / replace the broken LCD Display.

Resumen del Video

  1. Switch off the phone. Remove the battery and any inserted SIM and memory cards. Use a screwdriver Torx T6 and remove the 4x black screws.
    • Switch off the phone.

    • Remove the battery and any inserted SIM and memory cards.

    • Use a screwdriver Torx T6 and remove the 4x black screws.

  2. There are several plastic locking clips hold the back cover to the frame. Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover. Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.
    • There are several plastic locking clips hold the back cover to the frame.

    • Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

  3. Unhook: the touch screen flex cable the LCD Display flex cable
    • Unhook:

    • the touch screen flex cable

    • the LCD Display flex cable

    • Use a plastic tool lift up and remove the Logic board.

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. This is the logic board / main board - a front and rear view. This is the logic board / main board - a front and rear view.
    • This is the logic board / main board - a front and rear view.

  6. The Display metal shield is locked to the frame by 4x locking clips. Use a tool with a sharp tip and careful unlock them and remove the shield. Use a tool with a sharp tip and careful unlock them and remove the shield.
    • The Display metal shield is locked to the frame by 4x locking clips.

    • Use a tool with a sharp tip and careful unlock them and remove the shield.

  7. The display is stuck tovthe touch screen glass with a double-sided adhesive tape. Use a hair dryer or hot air gun and worm the glass to make adhesive soften. Distort the frame a little and use a thin plastic tool to separate the display from the frame.
    • The display is stuck tovthe touch screen glass with a double-sided adhesive tape.

    • Use a hair dryer or hot air gun and worm the glass to make adhesive soften.

    • Distort the frame a little and use a thin plastic tool to separate the display from the frame.

  8. The display is very fragile, do the separation very carefully.
    • The display is very fragile, do the separation very carefully.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

ZFix

Miembro Desde 09/12/13

165,269 Reputación

305 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

286 Miembros

810 Guías creadas

كيف اقوم بفك الهاتف وفحص الخلل الذي يوجد فيه .اعني ان هاتفي لا يقبل العمل اظن انه محروق كيف افحصه ؟

How do I remove the phone and to inspect the defect in which the .ani there is a telephone that does not accept the work I think it's seared how it checked ?

mohammad7salaheddin - Contestar

I am pretty sure he didn’t use ifixit stuff to fix the screen, lmao

mario rados - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 11

Todo El Tiempo: 2,680