Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

This guide will cover how to remove the screen of the Microsoft Band 2 smartwatch. If the display is blank or dim it may be advantageous to consider replacing the screen on the Band 2.

  1. Wear proper gloves when using a heatgun.
    • Wear proper gloves when using a heatgun.

    • Use a heatgun to melt the adhesive beneath the screen. Heat the metal around edges of the screen.

    • Avoid heating the rubber watch band as it will quickly melt.

    • Heating the LCD screen may damage it. Avoid this procedure unless you intend to replace the screen.

  2. Use metal tweezers to gently detach the orange press-fit (or "pop") connector. Use metal tweezers to gently detach the orange press-fit (or "pop") connector.
    • Use metal tweezers to gently detach the orange press-fit (or "pop") connector.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Chris Syracuse

Miembro Desde 20/02/17

637 Reputación

3 Guías creadas

Equipo

USF Tampa, Team S1-G5, Leahy Spring 2017 Miembro de USF Tampa, Team S1-G5, Leahy Spring 2017

USFT-LEAHY-S17S1G5

3 Miembros

5 Guías creadas

where I can buy microsoft band 2 screen. thanks

fredsonyo - Contestar

Way too Late lol.

Rowdy Bedsaul - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 1,587