Repara tus cosas Comunidad Tienda

Micro-USB Port Replacement

Qué necesitas

  1. Micro-USB Port Replacement, Back Plate: paso 1, imagen 1 de 2 Micro-USB Port Replacement, Back Plate: paso 1, imagen 2 de 2

    • Unscrew the four 3.4 mm flat head screws

    Editar

  2. Micro-USB Port Replacement: paso 2, imagen 1 de 1

    • Carefully lift the back plate off the watch. You will notice a lithium battery and rubber gasket attached to the back plate.

    Editar

  3. Micro-USB Port Replacement, Lithium Battery: paso 3, imagen 1 de 1

    • If not replacing lithium battery, skip down two steps.

    • Using the plastic removal tool, pry the battery from the backing plate. The battery is simply attached with glue.

    Editar

  4. Micro-USB Port Replacement: paso 4, imagen 1 de 1

    • Desolder the battery connections from the motherboard. Learn how to solder components here!

    Editar

  6. Micro-USB Port Replacement, Motherboard: paso 5, imagen 1 de 1

    • Use PH00 screw driver to remove two 2.4mm Phillips head screws.

    Editar

  7. Micro-USB Port Replacement: paso 6, imagen 1 de 1

    • Use a spudger or tweezers to remove a white sticker that covers a Phillips head screw.

    Editar

  8. Micro-USB Port Replacement: paso 7, imagen 1 de 1

    • Use PH00 screwdriver to remove 5.2mm Phillips head screw

    Editar

  9. Micro-USB Port Replacement: paso 8, imagen 1 de 3 Micro-USB Port Replacement: paso 8, imagen 2 de 3 Micro-USB Port Replacement: paso 8, imagen 3 de 3

    • Use ESD safe tweezers to remove the gold ribbon cable.

    • This will expose a second 5.2mm Phillips head screw that can be removed with a PH00 screwdriver.

    Editar

  10. Micro-USB Port Replacement: paso 9, imagen 1 de 2 Micro-USB Port Replacement: paso 9, imagen 2 de 2

    • Use a spudger to gently pry on the motherboard towards the top of the watch, being towards the 12 o'clock position to loosen the motherboard.

    • You can now access the parts and pieces on the bottom of, and below the motherboard.

    Editar

  11. Micro-USB Port Replacement, Micro-USB Port: paso 10, imagen 1 de 1

    • Locate the four main soldering points marked in red.

    • Be aware of the five additional soldered pins marked by the blue arrow.

    Editar

  12. Micro-USB Port Replacement: paso 11, imagen 1 de 3 Micro-USB Port Replacement: paso 11, imagen 2 de 3 Micro-USB Port Replacement: paso 11, imagen 3 de 3

    • Begin to desolder the points pointed out in the last step.

    • Use the soldering wick to help remove the solder.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Michael Miller

Miembro Desde 10/24/16

281 Reputación

2 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

IUPUI, Team 3-3, Baechle Fall 2016 Miembro de IUPUI, Team 3-3, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G3

4 Miembros

8 Guías creadas

Un comentario

I want to know that what I have to do if want to replace the lithium battery with usb direct powered device.

amupis232389 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 24

Ultimos 30 días: 88

Todo El Tiempo: 16,325