Menú

Tus configuraciones

Mi Mesa de Trabajo

Obtén acceso rápido a guías, partes y respuestas para tus dispositivos
Mi Carrito

Al parecer tu carrito está vacío

Visita Nuestra Tienda

MerchSource the Black Series Boat Racer Battery Replacement

Escrito Por: Monica Reece (y 3 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0

Dificultad

Fácil

Pasos

4

Tiempo Requerido

5 minutos

Secciones

1

Banderas

0

Introducción

This repair guide will show you how to replace the batteries in the MerchSource the Black Series Boat Racers toy boat to solve powering on issues.

Herramientas

Comprar estas herramientas

Partes

  1. Remove the screw on the top of the boat to access the battery compartment. Use a Phillips #2 screwdriver. Screw size is 16 mm in length.

    • Remove the screw on the top of the boat to access the battery compartment. Use a Phillips #2 screwdriver.

    • Screw size is 16 mm in length.

    Traducir

  2. Remove the battery compartment cover by sliding the cover in the direction of the back of the boat to disengage the lip holding it on. Remove the battery compartment cover by sliding the cover in the direction of the back of the boat to disengage the lip holding it on. Remove the battery compartment cover by sliding the cover in the direction of the back of the boat to disengage the lip holding it on.

    • Remove the battery compartment cover by sliding the cover in the direction of the back of the boat to disengage the lip holding it on.

    Traducir

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

  4. Remove the 6 screws using a Phillips #2 screwdriver. Ensure you store the screws where you will not lose them. Remove the battery cover once all the screws are removed. Screw sizes are all 10.5 mm in length.

    • Remove the 6 screws using a Phillips #2 screwdriver. Ensure you store the screws where you will not lose them.

    • Remove the battery cover once all the screws are removed.

    • Screw sizes are all 10.5 mm in length.

    Traducir

  5. Replace with new batteries, which are 6 x AA. Make sure the positive and negative ends of the batteries align with the positive and negative connections in the battery compartment. Check to make sure the boat is functional. If it is not powering on, consult the troubleshooting page.

    • Replace with new batteries, which are 6 x AA. Make sure the positive and negative ends of the batteries align with the positive and negative connections in the battery compartment.

    • Check to make sure the boat is functional. If it is not powering on, consult the troubleshooting page.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Monica Reece

Miembro Desde 31/08/18

651 Reputación

5 Guías creadas

Insignias: 3

Equipo

Western Carolina University, Team S1-G3, Virtue Fall 2018 Miembro de Western Carolina University, Team S1-G3, Virtue Fall 2018

WCU-VIRTUE-F18S1G3

4 Miembros

5 Guías creadas

0 Comentarios

Agregar un comentario
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 75