Saltar al contenido principal

MerchSource the Black Series Boat Racer Battery Cable Replacement

Qué necesitas

  1. MerchSource the Black Series Boat Racer Battery Cable Replacement, Battery Cable: paso 1, imagen 1 de 2 MerchSource the Black Series Boat Racer Battery Cable Replacement, Battery Cable: paso 1, imagen 2 de 2
    • Turn the remote controller over to the back.

  2. MerchSource the Black Series Boat Racer Battery Cable Replacement: paso 2, imagen 1 de 1
    • Slide the battery cover off.

  3. MerchSource the Black Series Boat Racer Battery Cable Replacement: paso 3, imagen 1 de 2 MerchSource the Black Series Boat Racer Battery Cable Replacement: paso 3, imagen 2 de 2
    • Remove both AA-batteries.

  4. MerchSource the Black Series Boat Racer Battery Cable Replacement: paso 4, imagen 1 de 1
    • Use a Phillips #1 screwdriver, remove the four screws located in the four corners of the back of the remote controller.

    • Screw length is 6 mm.

  5. MerchSource the Black Series Boat Racer Battery Cable Replacement: paso 5, imagen 1 de 3 MerchSource the Black Series Boat Racer Battery Cable Replacement: paso 5, imagen 2 de 3 MerchSource the Black Series Boat Racer Battery Cable Replacement: paso 5, imagen 3 de 3
    • Separate the two halves of the remote controller.

  6. MerchSource the Black Series Boat Racer Battery Cable Replacement: paso 6, imagen 1 de 1
    • Solder the wire to reconnect it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 195