Saltar al contenido principal

Introducción

These steps will instruct you on removing a broken spring and replace it with a new one.

  1. Locate the 'OPEN' tab on the battery compartment. Pull the tab upwards and remove the cover using your finger. Remove the batteries.
    • Locate the 'OPEN' tab on the battery compartment.

    • Pull the tab upwards and remove the cover using your finger.

    • Remove the batteries.

  2. Locate the screws on the bottom of the device that hold the upper and lower halves together. Remove the (5) 19mm screws. Grasp the top and bottom and gently pull apart.
    • Locate the screws on the bottom of the device that hold the upper and lower halves together.

    • Remove the (5) 19mm screws.

    • Grasp the top and bottom and gently pull apart.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Remove screw with plastic retaining plastic piece. Remove screw with plastic retaining plastic piece.
    • Remove screw with plastic retaining plastic piece.

  5. Grasp and remove the spring using fine tip tweezers. The spring is very small and can be lost easily. The spring is very small and can be lost easily.
    • Grasp and remove the spring using fine tip tweezers.

    • The spring is very small and can be lost easily.

  6. Remove the spring with a flat tip screwdriver. Remove the spring with a flat tip screwdriver.
    • Remove the spring with a flat tip screwdriver.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 65