Repara tus cosas Comunidad Tienda

Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement

Introducción

In order to control the speed of your electric skateboard you must have a functioning accelerator. This step-by-step guide will assist you with replacing your accelerator in your Meepo V2 Electric Skateboard Remote in order to guarantee your remote is fully functional and safe to use.

Qué necesitas

  1. Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement, Accelerator Cable: paso 1, imagen 1 de 2 Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement, Accelerator Cable: paso 1, imagen 2 de 2

    • Peel off the brand sticker from the back of the remote.

    Editar

  2. Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement: paso 2, imagen 1 de 2 Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement: paso 2, imagen 2 de 2

    • Using a Phillips #1 screwdriver remove the three screws.

    Editar

  4. Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement: paso 3, imagen 1 de 3 Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement: paso 3, imagen 2 de 3 Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement: paso 3, imagen 3 de 3

    • Lift the backside of the remote off.

    • The marked area is the accelerator cable that needs to be removed.

    Editar

  5. Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement: paso 4, imagen 1 de 3 Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement: paso 4, imagen 2 de 3 Meepo V2 Electric Skateboard Remote Accelerator Cable Replacement: paso 4, imagen 3 de 3

    • Unplug the connector and remove the accelerator cable.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 21

Todo El Tiempo: 952