Repara tus cosas Comunidad Tienda

Maze Speed SSB-508 Power and Volume Button Replacement

Introducción

This guide will show you how to replace the power and volume buttons in a Maze Speed SSB-508 phone. If the power or volume buttons are unresponsive or malfunctioning, they may need to be replaced. To complete this guide, a plastic opening tool, tweezers, and a new button piece is required. Precision is recommended, as to not damage any components.

Qué necesitas

  1. Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: paso 1, imagen 1 de 3 Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: paso 1, imagen 2 de 3 Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: paso 1, imagen 3 de 3

    • Remove the back cover by gently prying open the bottom left corner of the case with the plastic opening tool.

    Traducir

  3. Maze Speed SSB-508 Power and Volume Button Replacement: paso 2, imagen 1 de 2 Maze Speed SSB-508 Power and Volume Button Replacement: paso 2, imagen 2 de 2

    • There are three areas holding the power and volume buttons in place. Gently pull the bottom of the power button with a pair of fine-tip tweezers to release the lower half.

    Traducir

  4. Maze Speed SSB-508 Power and Volume Button Replacement: paso 3, imagen 1 de 3 Maze Speed SSB-508 Power and Volume Button Replacement: paso 3, imagen 2 de 3 Maze Speed SSB-508 Power and Volume Button Replacement: paso 3, imagen 3 de 3

    • Carefully remove the top section of the button with the fine-tip tweezers . This should free the button completely.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 282