Saltar al contenido principal

Master and Dynamic MW50 Charging Port Replacement

Qué necesitas

  1. Master and Dynamic MW50 Charging Port Replacement, Master and Dynamic MW50 Disassembly: paso 1, imagen 1 de 3 Master and Dynamic MW50 Charging Port Replacement, Master and Dynamic MW50 Disassembly: paso 1, imagen 2 de 3 Master and Dynamic MW50 Charging Port Replacement, Master and Dynamic MW50 Disassembly: paso 1, imagen 3 de 3
    • Pull the cushion off of the desired side by gripping the top of the headphones and pulling the cushion off.

  2. Master and Dynamic MW50 Charging Port Replacement: paso 2, imagen 1 de 1
    • Remove the four 5mm screws from the earpiece with a Y1 Triwing screwdriver.

  3. Master and Dynamic MW50 Charging Port Replacement: paso 3, imagen 1 de 1
    • Use the Jimmy to lift up the black cover to get inside the device.

  4. Master and Dynamic MW50 Charging Port Replacement, Charging Port: paso 4, imagen 1 de 2 Master and Dynamic MW50 Charging Port Replacement, Charging Port: paso 4, imagen 2 de 2
    • Remove the two 2mm screws pictured with a JIS #00 screwdriver.

    • Gently pull the silver cover off of the ear piece.

  5. Master and Dynamic MW50 Charging Port Replacement: paso 5, imagen 1 de 1
    • Remove the two 2mm screws shown with a JIS #00 screwdriver.

  6. Master and Dynamic MW50 Charging Port Replacement: paso 6, imagen 1 de 1
    • Lift up the mother board with the attached charging port to see the soldering points. You must desolder these points in order to detach (and re-attach) the charging port.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tyler Guffey

Miembro Desde 01/24/19

208 Reputación

2 Guías creadas

Equipo

Cal Poly, Team S1-G4, White Winter 2019 Miembro de Cal Poly, Team S1-G4, White Winter 2019

CPSU-WHITE-W19S1G4

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 297