Repara tus cosas Comunidad Tienda

Marvel iHome MR-M66 Back Cover Replacement

Introducción

This guide will show how to remove and replace this device's back cover. No additional experience is required.

Qué necesitas

  1. Marvel iHome MR-M66 Back Cover Replacement, Back Cover: paso 1, imagen 1 de 2 Marvel iHome MR-M66 Back Cover Replacement, Back Cover: paso 1, imagen 2 de 2

    • Remove two of the three screws shown on the bottom of the device.

    • Begin removing the last screw, but leave it partially in the socket to remove the bottom cover easier.

    Editar

  2. Marvel iHome MR-M66 Back Cover Replacement: paso 2, imagen 1 de 3 Marvel iHome MR-M66 Back Cover Replacement: paso 2, imagen 2 de 3 Marvel iHome MR-M66 Back Cover Replacement: paso 2, imagen 3 de 3

    • Remove the bottom cover by either pulling on the screw or using a plastic opening tool to pry the cover off.

    • After removing the bottom cover, remove the two screws.

    Editar

  3. Marvel iHome MR-M66 Back Cover Replacement: paso 3, imagen 1 de 3 Marvel iHome MR-M66 Back Cover Replacement: paso 3, imagen 2 de 3 Marvel iHome MR-M66 Back Cover Replacement: paso 3, imagen 3 de 3

    • Use a spudger to release the small retaining clip that holds the feet to the bottom of the device.

    • Be careful here, as too much force can break the clip.

    • Remove the two screws from the back of the device.

    Editar

  4. Marvel iHome MR-M66 Back Cover Replacement: paso 4, imagen 1 de 3 Marvel iHome MR-M66 Back Cover Replacement: paso 4, imagen 2 de 3 Marvel iHome MR-M66 Back Cover Replacement: paso 4, imagen 3 de 3

    • Using a plastic opening tool and your hand, separate the front and back covers from each other.

    • Starting from the bottom, use the plastic opening tool to create the initial separation and continue along the seam to the top of the device.

    • This step requires the most time and patience, so be careful.

    • The power switch will most likely come loose during this step and you will hear something rattling inside the device.

    Editar

  5. Marvel iHome MR-M66 Back Cover Replacement: paso 5, imagen 1 de 3 Marvel iHome MR-M66 Back Cover Replacement: paso 5, imagen 2 de 3 Marvel iHome MR-M66 Back Cover Replacement: paso 5, imagen 3 de 3

    • Remove the two arms from either side of the device once a significant separation has been created.

    • They are not fixed to the body itself so you should be able to wiggle them free.

    • Continue pulling the back cover off the device.

    • Remove the red cover for the on/off switch from the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Aaram Williams

Miembro Desde 03/08/17

201 Reputación

3 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

UMass Dartmouth, Team S5-G3, Botvin Spring 2017 Miembro de UMass Dartmouth, Team S5-G3, Botvin Spring 2017

UMASSD-BOTVIN-S17S5G3

3 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 107