Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Martian Victory Watch Face Replacement

Qué necesitas

  1. Martian Victory Watch Face Replacement, Back Plate: paso 1, imagen 1 de 2 Martian Victory Watch Face Replacement, Back Plate: paso 1, imagen 2 de 2
    • Unscrew the four 3.4 mm flat head screws

  2. Martian Victory Watch Face Replacement: paso 2, imagen 1 de 1
    • Carefully lift the back plate off the watch. You will notice a lithium battery and rubber gasket attached to the back plate.

  3. Martian Victory Watch Face Replacement, Lithium Battery: paso 3, imagen 1 de 1
    • If not replacing lithium battery, skip down two steps.

    • Using the plastic removal tool, pry the battery from the backing plate. The battery is simply attached with glue.

  4. Martian Victory Watch Face Replacement: paso 4, imagen 1 de 1
    • Desolder the battery connections from the motherboard. Learn how to solder components here!

  5. Martian Victory Watch Face Replacement, Motherboard: paso 5, imagen 1 de 1
    • Use PH00 screw driver to remove two 2.4mm Phillips head screws.

  6. Martian Victory Watch Face Replacement: paso 6, imagen 1 de 1
    • Use a spudger or tweezers to remove a white sticker that covers a Phillips head screw.

  7. Martian Victory Watch Face Replacement: paso 7, imagen 1 de 1
    • Use PH00 screwdriver to remove 5.2mm Phillips head screw

  8. Martian Victory Watch Face Replacement: paso 8, imagen 1 de 3 Martian Victory Watch Face Replacement: paso 8, imagen 2 de 3 Martian Victory Watch Face Replacement: paso 8, imagen 3 de 3
    • Use ESD safe tweezers to remove the gold ribbon cable.

    • This will expose a second 5.2mm Phillips head screw that can be removed with a PH00 screwdriver.

  9. Martian Victory Watch Face Replacement: paso 9, imagen 1 de 2 Martian Victory Watch Face Replacement: paso 9, imagen 2 de 2
    • Use a spudger to gently pry on the motherboard towards the top of the watch, being towards the 12 o'clock position to loosen the motherboard.

    • You can now access the parts and pieces on the bottom of, and below the motherboard.

  10. Martian Victory Watch Face Replacement, LED Screen: paso 10, imagen 1 de 1
    • Locate the ribbon connection, and use remove the clips holding the strip on each side using needle tool.

  11. Martian Victory Watch Face Replacement: paso 11, imagen 1 de 1
    • With a pair of tweezers, carefully remove the ribbon strip connection.

  12. Martian Victory Watch Face Replacement: paso 12, imagen 1 de 1
    • Remove the screw driver holding the LED screen and Speaker in place.

  13. Martian Victory Watch Face Replacement: paso 13, imagen 1 de 1
    • Insert a small flat screw driver under the speaker in order to remove it.

  14. Martian Victory Watch Face Replacement: paso 14, imagen 1 de 2 Martian Victory Watch Face Replacement: paso 14, imagen 2 de 2
    • Using tweezers, remove the speaker and move off to the side.

  15. Martian Victory Watch Face Replacement: paso 15, imagen 1 de 2 Martian Victory Watch Face Replacement: paso 15, imagen 2 de 2
    • Place a small flat head screwdriver under the LED screen, and carefully push it out of it's socket.

  16. Martian Victory Watch Face Replacement: paso 16, imagen 1 de 1
    • Remove final connection to accelerometer. The LED screen is now separated from the device.

  17. Martian Victory Watch Face Replacement, Watch Face: paso 17, imagen 1 de 2 Martian Victory Watch Face Replacement, Watch Face: paso 17, imagen 2 de 2
    • Grab the motherboard with tweezers and remove from watch cavity.

  18. Martian Victory Watch Face Replacement: paso 18, imagen 1 de 2 Martian Victory Watch Face Replacement: paso 18, imagen 2 de 2
    • Stabilize watch with the metal prove. Place tweezers around crown and pull outward, so that the crown can be removed.

  19. Martian Victory Watch Face Replacement: paso 19, imagen 1 de 1
    • Insert the spudger under plastic panel cover in order to access watch face.

  20. Martian Victory Watch Face Replacement: paso 20, imagen 1 de 3 Martian Victory Watch Face Replacement: paso 20, imagen 2 de 3 Martian Victory Watch Face Replacement: paso 20, imagen 3 de 3
    • Insert a spudger under the black watch face. Gently push up, so that it can be raised out of the watch.

    • Use tweezers or pin tool in order to remove from watch.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Robert Sanchez

Miembro Desde 10/31/16

201 Reputación

2 Guías creadas

Equipo

IUPUI, Team 3-3, Baechle Fall 2016 Miembro de IUPUI, Team 3-3, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G3

4 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 387