Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully lift the back plate off the watch. You will notice a lithium battery and rubber gasket attached to the back plate.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the plastic removal tool, pry the battery from the backing plate. The battery is simply attached with glue.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Desolder the battery connections from the motherboard. Learn how to solder components here!
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use PH00 screw driver to remove two 2.4mm Phillips head screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a spudger or tweezers to remove a white sticker that covers a Phillips head screw.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use PH00 screwdriver to remove 5.2mm Phillips head screw
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use ESD safe tweezers to remove the gold ribbon cable.
-
This will expose a second 5.2mm Phillips head screw that can be removed with a PH00 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a spudger to gently pry on the motherboard towards the top of the watch, being towards the 12 o'clock position to loosen the motherboard.
-
You can now access the parts and pieces on the bottom of, and below the motherboard.
-