Repara tus cosas Comunidad Tienda

Martian Victory Motherboard Replacement

Introducción

How to access and remove the motherboard of the Martian Smartwatch

Qué necesitas

  1. Martian Victory Motherboard Replacement, Back Plate: paso 1, imagen 1 de 2 Martian Victory Motherboard Replacement, Back Plate: paso 1, imagen 2 de 2

    • Unscrew the four 3.4 mm flat head screws

    Traducir

  2. Martian Victory Motherboard Replacement: paso 2, imagen 1 de 1

    • Carefully lift the back plate off the watch. You will notice a lithium battery and rubber gasket attached to the back plate.

    Traducir

  3. Martian Victory Motherboard Replacement, Lithium Battery: paso 3, imagen 1 de 1

    • If not replacing lithium battery, skip down two steps.

    • Using the plastic removal tool, pry the battery from the backing plate. The battery is simply attached with glue.

    Traducir

  5. Martian Victory Motherboard Replacement: paso 4, imagen 1 de 1

    • Desolder the battery connections from the motherboard. Learn how to solder components here!

    Traducir

  6. Martian Victory Motherboard Replacement, Motherboard: paso 5, imagen 1 de 1

    • Use PH00 screw driver to remove two 2.4mm Phillips head screws.

    Traducir

  7. Martian Victory Motherboard Replacement: paso 6, imagen 1 de 1

    • Use a spudger or tweezers to remove a white sticker that covers a Phillips head screw.

    Traducir

  8. Martian Victory Motherboard Replacement: paso 7, imagen 1 de 1

    • Use PH00 screwdriver to remove 5.2mm Phillips head screw

    Traducir

  9. Martian Victory Motherboard Replacement: paso 8, imagen 1 de 3 Martian Victory Motherboard Replacement: paso 8, imagen 2 de 3 Martian Victory Motherboard Replacement: paso 8, imagen 3 de 3

    • Use ESD safe tweezers to remove the gold ribbon cable.

    • This will expose a second 5.2mm Phillips head screw that can be removed with a PH00 screwdriver.

    Traducir

  10. Martian Victory Motherboard Replacement: paso 9, imagen 1 de 2 Martian Victory Motherboard Replacement: paso 9, imagen 2 de 2

    • Use a spudger to gently pry on the motherboard towards the top of the watch, being towards the 12 o'clock position to loosen the motherboard.

    • You can now access the parts and pieces on the bottom of, and below the motherboard.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Dominic Coffey

Miembro Desde 10/24/16

231 Reputación

2 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

IUPUI, Team 3-3, Baechle Fall 2016 Miembro de IUPUI, Team 3-3, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G3

4 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 178