Saltar al contenido principal

Introducción

Detailed images and descriptions will be provided to show the user how to replace the lithium battery.

  1. Unscrew the four 3.4 mm flat head screws Unscrew the four 3.4 mm flat head screws
    • Unscrew the four 3.4 mm flat head screws

  2. Carefully lift the back plate off the watch. You will notice a lithium battery and rubber gasket attached to the back plate.
    • Carefully lift the back plate off the watch. You will notice a lithium battery and rubber gasket attached to the back plate.

  3. If not replacing lithium battery, skip down two steps.
    • If not replacing lithium battery, skip down two steps.

    • Using the plastic removal tool, pry the battery from the backing plate. The battery is simply attached with glue.

  4. Desolder the battery connections from the motherboard. Learn how to solder components here!
    • Desolder the battery connections from the motherboard. Learn how to solder components here!

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

David Miller

Miembro Desde 24/10/16

246 Reputación

2 Guías creadas

Equipo

IUPUI, Team 3-3, Baechle Fall 2016 Miembro de IUPUI, Team 3-3, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G3

4 Miembros

8 Guías creadas

Un Comentario

I’m wondering… where did you buy the replacement battery?

Randy Trask - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 6

Todo El Tiempo: 625