Saltar al contenido principal

Manatee V2S Intelligent Clothes Dryer Filter Replacement

Qué necesitas

  1. Manatee V2S Intelligent Clothes Dryer Filter Replacement, Filter: paso 1, imagen 1 de 1
    • Turn the machine upside down.

  2. Manatee V2S Intelligent Clothes Dryer Filter Replacement: paso 2, imagen 1 de 1
    • Use a Phillips #0 screwdriver to remove the 3.5 mm screw holding the bottom case to the device.

  3. Manatee V2S Intelligent Clothes Dryer Filter Replacement: paso 3, imagen 1 de 1
    • Cut out about 10 cm of scotch tape.

    • Turn it over and go around your hand as shown in the image, which lets the adhesive side on the outside. (Because it is easy to remove dust)

    • You can also use any other ways to remove the dust, but make sure not to break the filter.

  4. Manatee V2S Intelligent Clothes Dryer Filter Replacement: paso 4, imagen 1 de 1
    • Take out the filter.

    • Tap the dust and particles into the garbage, remove the dust with scotch tape, or replace the filter.

  5. Manatee V2S Intelligent Clothes Dryer Filter Replacement: paso 5, imagen 1 de 2 Manatee V2S Intelligent Clothes Dryer Filter Replacement: paso 5, imagen 2 de 2
    • Check for broken/loose wiring and other connections.

    • Dust may not be the only reason for the poor performance.

    • Close the lid and replace the screw.

Conclusión

To reassemble your device, follow these instructions in reverse order.

[deleted]

Miembro Desde 09/17/21

121 Reputación

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 7

Ultimos 30 días: 15

Todo El Tiempo: 482